Technical Specifications TERRANICA Dreamtrack  

Engine Turbo diesel VM (China)

 

Volume, l

2,0

Power  kWt  (horsepower)

110 (150)

Torque nm

330

Automatic transmission ZF (China)

4-speed automatic

Swing mechanism

Side clutches

Fuel tank capacity, l

120

Total range, km

400

Gradeability, grade

30

Overcome the slope, grade

20

Number of seats/beds

6

Max speed, km/h (miles/h)

80 (50)

Length, mm

3620

Width, mm

2200

Height, mm

2020

Base, mm

2150

Clearance, mm

430

Track width, mm

500

Axle track, mm

1700

Weight (Curb/Full), kg

1750/2350

Average specific ground pressure, kg/cm2

0,1

 

TURN AND BRAKE MECHANISM

Terranica Dreamtrack has on-board friction clutches with tremendous traction. Side clutches are with oil in the crankcase.

The rotation mechanism is located in a closed crankcase and provides a torque cut-off by 13 friction pairs.

The brake mechanism is located outside the body, inside the impeller.

BODY

The body is made of combined materials – a welded aluminum boat with a glued steel frame covered with a single fiberglass component – a deck.

This design made it possible to make the body light and tough in the same time.

The whole body is covered with 50mm effective thermal insulation, which effectively saving the heat.

Our ATV is equipped with a reliable heating system, which, despite the tented top allows, even at outside temperatures up to -40 degrees, to maintain a comfortable temperature in the cabin.

In addition to the driver and front passenger, additional four more passengers can sit on the rear benches located parallel to the direction of movement.

Armour plating of the front and the bottom of the body was superimposed with a super-durable sheet polymer, which is used for lining the body of off-road dump trucks.

SUSPENSION

The suspension is completely independent, long-stroke and energy-intensive.

Suspension details are now not in danger of high mileage and harsh conditions since the latest developments in the field of heavy-duty polymers have created a suspension whose details have low abrasion and high impact resistance.

The suspension arms, drive wheel, guides and supporting rollers are made of heavy-duty polymer which have a large modulus of elasticity, low weight and gave the vehicle additional buoyancy due to the low specific gravity.

The use of high-strength polymers in these units and parts and their ability to repel freezing from snow, made it possible to minimize the freezing by snow and ice of the entire suspension and drive mechanism.

RUBBER AND TEXTILE TRACKS AND WHEELS

Snow-swamp caterpillar tracks have extraordinary reliability, due to the use of a combined textile and glass-filled cord, which significantly increased their strength.

It is made collapsible into two parts – a comb and, in fact, a rubber sheet. Caterpillars on all Terranica Dreamtrack models since 2018 are installed only in width of 500 mm.

Working wheels are made of aluminium with replaceable items made of high-strength polymer.

VEHICLE CONTROL SYSTEM

Terranica Dreamtrack has car-type controls – intuitive for any driver.

There is no need to specifically learn how to drive our caterpillar ATV, you can just jump straight from your car and move on.

OPTIONS

Basic equipment

Additional options

Engine Turbo diesel  (VM, China)

Hitch

4-speed automatic transmission (ZF, China)

 

Swing control mechanism – side clutch

Synthetic rope electric winch

500 mm wide tracks

 

Tented top

A set of options for overcoming water barriers (transom, bilge pump, outboard electric motor, 1.2 kW)

Adjustable front seats

Additional gel battery with 90 A/h switch

Long travel spring suspension

LED lights for additional lighting

Cabin heater

 

Windshield wiper and washer

Preheater (Eberspacher, Germany)

Seat belts

 

Tool kit

Set of luggage bags (5 pieces)

USB socket

 

Hi-lift jack

Armoured bottom and front of the boat

All colours are available

Protective cover